PHOTOS COURTESY OF MARCUS BURROWS - MANY THANKS

QUOTE FROM RM WEB - As you can see they are a set of blue panels with the fine red lining around them. They are intended to be installed over a black background, as would be the case with the J70 ‘out of the box’. Lettering and numbering must be sourced from the Fox range as well. 

The main panels and the smaller end and side panels should be self-explantory, but the buffer beam panels may need some guidance. As they are they will fit as one panel, provided you have not fitted the buffers, couplings or safety chain loops. The holes for the buffers are marked to guide you in trimming the decal to fit around installed buffers. If you have fitted anything else you are in for more cutting. I was in that position and they held up well without folding over or rolling; they are produced by Fox so they can be expected to be good and I find them to be so.